0x607C Home offset

Defines the difference between the zero position for the application and the machine home position (found during homing). During homing, the machine home position is found and once the homing is completed, the zero position is offset from the home position by adding the home offset to the home position. All subsequent absolute moves are taken relative to this new zero position. The units are user-defined (increments of the position encoder by default; see 0x6092 Feed constant to change it).

Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Home offset	0x607C:0	DINT	32			0	Inc	readwrite	Receive PDO (Outputs)