Dimensions and mechanical mounting

Note

SOMANET Circulo is manufactured in tolerance class f according to ISO 2768-1.
Please ensure sufficient contact to heat conducting materials and use thermal paste if necessary.

Dimensions

SOMANET Circulo 7SOMANET 9SOMANET Circulo 7
../../../../../_images/circulo_700_top_view.png ../../../../../_images/circulo_700_side_view.png ../../../../../_images/circulo_700_encder1.png ../../../../../_images/circulo_700_encoder2.png
SOMANET 9
../../../../../_images/circulo_1800_top_view.png ../../../../../_images/circulo_1800_side_view.png ../../../../../_images/circulo_1800_encder1.png ../../../../../_images/circulo_1800_encoder2.png

Drilling patterns for mounting

SOMANET Circulo 7SOMANET Circulo 9SOMANET Circulo 7
../../../../../_images/a2_circulo_700_mount_top.png ../../../../../_images/a2_circulo_700_mount_bottom.png
SOMANET Circulo 9
../../../../../_images/a2_circulo_1800_mount_top.png ../../../../../_images/a2_circulo_1800_mount_bottom.png

Heat dissipation

For correct functioning, the servo drive must be installed on a sufficiently dimensioned heat conducting surface made of a suitable material, such as aluminum.

Ensure that the servo drive is screwed properly to the heat conducting surface to facilitate the heat transfer.

That’s it! The next step is commissioning and tuning your drive:

Commissioning and tuning with OBLAC Drives