Dimensions

Note

SOMANET Circulo is manufactured in tolerance class f according to ISO 2768-1.
Please ensure sufficient contact to heat conducting materials and use thermal paste if necessary.

Attention

Servo drives should not be mounted in direct sunlight.

Dimensions

Circulo 7Circulo 9Circulo 7
../../../../../_images/b1_circulo_7_top_view1.png ../../../../../_images/b1_circulo_7_side_view1.png ../../../../../_images/circulo_7_encoder_1_and_2.png
Circulo 9
../../../../../_images/b1_circulo_9_top_view1.png ../../../../../_images/b1_circulo_9_side_view1.png ../../../../../_images/circulo_9_encoder_1_and_2.png

Drilling patterns

Circulo 7Circulo 9Circulo 7
../../../../../_images/b1_circulo_7_mount_top1.png ../../../../../_images/b1_circulo_7_mount_bottom1.png
Circulo 9
../../../../../_images/b1_circulo_9_mount_top1.png ../../../../../_images/b1_circulo_9_mount_bottom1.png

Mounting a bearing

If a bearing is required it can be fitted into the dowel holes and tightened with screws.

Circulo 7Circulo 9Circulo 7
../../../../../_images/b1_c7_bearing1.png
Circulo 9
../../../../../_images/b1_c9_bearing1.png

Side view with phase connectors

Circulo 7Circulo 9Circulo 7
../../../../../_images/circulo_7_phase_connectors.png
Circulo 9
../../../../../_images/circulo_9_phase_connectors.png